Tamiya 1/10 Electric RC Car Series No.583 Egress (2013) Off-road 58583

Tamiya 1/10 Electric RC Car Series No.583 Egress (2013) Off-road 58583 Description Condition: New An Egress RC assembly kit that can be said to be the origin of Tamiya RC buggies, descending from the famous Avante. Both the upper and lower decks are made of carbon, and the wheelbase is longer than the Avante. Equipped with newly developed ball differentials at the front and rear, and a torque splitter at the center. The front and rear drive shafts are assembly universal types. *This product does not include the transmitter, transmitter battery, RC mechanism (receiver, ESC, servo, etc.), driving battery, battery charger, etc. Additional parts purchase, assembly, and painting are required before driving. [A coveted machine with enhanced potential to match the current RC scene] The Avante was introduced in 1988 as the highest model of 4WD buggies.The following year, TRF (Tamiya Racing Factory) was formed, and Tamiya began racing in the world. Taking the know-how gained through racing, we designed a new car specifically for racing based on the Avante, using carbon plates that had been used in F1 and aircraft, a ball differential, and a large oil capacity. The Egress was developed with the aim of winning in races, using dampers and lightweight but expensive titanium screws. At the time, belt-driven cars were in full swing, but the Egress was the only shaft-driven car that was active in races, and is now known as the Egress. Each part has been revived with increased potential to suit the RC scene. [Highly rigid shaft drive 4WD chassis that uses many carbon parts] The chassis is a carbon double deck.It boasts high rigidity that does not budge even in torsion.The power train of the vertical motor shaft drive 4WD is a full bearing specification.The front and rear ball differentials are A new part based on the original design. In addition to smooth operation, maintainability and durability have been improved. Also, a one-way bearing is built into the drive gear, and the torque splitter effect provides straightforward handling. Changed to a one-way bearing. It is also possible to make it into a locking specification.Furthermore, the universal shaft, which is most heavily used in the drive system, has the same structure as the current TRF series, achieving smooth drive and high reliability.The suspension is double 4 independent wishbone wheels.Equipped with 4 oil dampers that use aluminum cylinders, and stabilizers are also installed on the front and rear.The front upright is made of high-strength machined aluminum.The steering system is equipped with ball bearings on the wiper arm axis, A 2.0mm thick carbon plate is used to create linear handling.Although titanium screws are not used this time, the performance improvement more than makes up for it.Even with the currently mainstream brushless motor, you can enjoy a wonderful ride. can do. [Basic specifications] ●Overall length: 430mm, overall width: 243mm, overall height: 157mm ●Wheelbase: 275mm ●Tread: front and rear: 200mm ●Frame: Carbon double deck ●Drive system: Shaft drive 4WD ●Body/under cowl: Made of polycarbonate ●Differential gear: Front and rear Ball differential, center one-way ●Steering = 3-split tie rod type ●Suspension = 4-wheel double wishbone ●Tire width/diameter = front 32/88mm, rear 40/88mm ●Damper = aluminum cylinder high-cap oil damper ●Gear ratio = 8.33 :1 (22T pinion gear included in the kit) ●540 type motor (sold separately) ●Speed controller = ESC specification (sold separately) [What to purchase separately] ●540 type motor ●Fine spec 2.4G electric RC drive set ●4 AA batteries for transmitter Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers – Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. * Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.